FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 6500 Parts

Category: Engine Parts

[Categories] [All 6500 Parts] [All Ford Models]

Camshaft - For 4-cylinder gas or diesel engine in tractors 5000 (1965 to 1975); 5600, 5700, 6600, 6700, 7600, 7700, (1975 to 1981); 5610, 5900, 6610, 6710, 7710, (1981 to 1991). Industrial: 650, 6500, 750, 755, 755A, 7500, (1972 to 7-1987); 755B, (8-1987 to -); 655, 655A, (6-1985 to 10-1988). With 3/16 inch Keyway. Replaces C7NN6250B, E1TN6250AA, E6NN6250AA. (Item #: 150911, Ref: 87800353) $120.00

Connecting Rod Assembly (36mm Journal) - New. Replaces C7NN6200A, E3HN6200AC, E4NN6200AB, E9NN6200AB, E9NN6200CA, F9NN6200AB, 81864279, 81875622, E3HN6200AC42, F2NN6200BA (*NOTE: Replace the complete set when replacing C5NE6200A Gas 1965-3/1968).C7NN6200A (Item #: 128642, Ref: C7NN6205) $103.00

Crankshaft - 4 cylinder, 4.2 inch stroke, 12.5 mm 78 tooth Balancer Gear. Uses 36 mm wide Rod Bearings. NOTE: Measure Balancer Drive Gear before ordering. Do not mix sizes. Used on 5000, 5100, 5190, 5200, 5600, 5610, 5700, 6000, 6500, 6600, 6610, 6700, 6710, 7000, 7100, 7200, 7600, 7610, 7700, 7710, Fits Ford Construction and Industrial (s) A62, 650, 655, 750, 5500, 5550, 7500. Replaces 81804029, C5NE6303K, F0NN6300FB (Item #: 100552, Ref: C5NE6303K) $604.00

Crankshaft - 76 Tooth Gear - Late - For Ford tractor models Super Major, 5000, 5100, 5190, 5200, 5600, 5610, 5700, 6000, 6500, 6600, 6610, 6700, 6710, 7000, 7100, 7200, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models A62, 650, 655, 750, 5500, 5550, 7500, Compatible with Ford Engine (s) BSD442, 256, Replaces Ford OEM number 81804029, C5NE6303K, F0NN6300FB, Replaces Casting number 6110A, Engine: 256 CID - 4.2 Stroke, 4 Cylinder, Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole, Balance Drive Gear: 76 Tooth Right Hand Helix, 15MM Wide - Installed, Snout: 1 Bolt Hole, 1 Keyway, Verify gear tooth count before ordering, Additional Handling and Oversize Fees Apply To This Item, (Item #: 100553) $452.00

Crankshaft Balancer Assembly - For Ford tractor models 4830, 5030, 5110, 5600, 5610, 5900, 6500, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 655A, 655C, 655D, 675D, 750, 755A, 755B, 7500, Replaces Ford OEM number F1NN6A311AA, E5NN6A311AA, 81873989, E3NN6A311AA, Teeth: 39, 5/8" wide gears, (Item #: 169723) $405.00

Crankshaft Pulley - Used on Ford / New equipment built 1965 and later. This is a single groove pulley. This pulley is not for Shibaura built compacts. Replaces D5NN6A312A, 83903583 (Item #: 154921, Ref: D5NN6A312A) $125.00

Crankshaft Pulley Spacer - Used on many Ford / New Holland models, 1965 and later, this is a keyed spacer. It fits behind the crankshaft pulley. Replaces OEM part numbers 83995427, 1811427, 81811427, C5NE6B306A, C5NE6C306A (Item #: 154924, Ref: C5NE6B306A) $20.30

Engine Balancer - For 2000 3 cylinder gas, 3000 gas, 4000 3 cylinder gas, 5000 gas and diesel, 5600, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710. Replaces 87802137, D9NN6A311AD, 83924287. Used through 8/1986. 1/2 inch wide gears. (Item #: 168875, Ref: D9NN6A311AD) $378.00

Idler Pulley With Bracket - This Idler Pulley With Bracket is used on multiple Ford / New Holland Agriculture and Industrial models. It replaces part numbers 83986807, E6NN8A614AB (Item #: 160935, Ref: E6NN8A614AB) $117.00

Intake Valve Seal - Used on Ford / New Holland equipment, 1965 and later with BSD diesel engines (not Shibaura engines), this seal replaces OEM numbers 81804329, 86602420, C5NE6571A, 1804329. Used on 3, 4 and 6 cylinder engines. One used per intake valve. Sold individually. (Item #: 166331, Ref: C5NE6571A) $0.80

Ring Gear, Flywheel - This ring gear is for gas and diesel. Measures 16.115 outside diameter, 14.52 inside diameter, .625 width and has 128 teeth. For models 2000, 3000, 4000, 5000, 6000, 7000, all 1965-1975. For 2600, 3600, 4600, 5600, 6600, 7700, all 1975-1981. For 5000 gas 6/1971-1975. For 3230, 3430, 3930, 4130, 4430, 4830, 5030, 3/1990 and up. Also used on many industrials and later models. Replaces C5NE6384AA, 83949153, 82954183, 9710967, 500791, 18042303, 80873368, 873368, 3949153. Starter Flywheel Ring Gear. (Item #: 111310, Ref: E2NN6384AA) $41.20

Timing Gear Cover, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445, 445A, 450, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 655, 655A, 750, 755, 755A, 755B, 3500, 3550, 4400, 4500, 6500, 7500, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T, 256, Replaces Ford OEM nos D9NN6059AA, D5NN6059N, D5NN6059J, D5NN6059F, D5NN6059A, D0NN6059C, Replaces Casting nos D0NN6059F, D5NN6059, D9NN6059, D9NN6059N, Fifteen: 5/16 Bolts and Two: 3/8 Bolts Around the outer edge, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435271) $112.01

Valve Cover, Used - For Ford tractor models 4830, 5030, 5110, 5610, 6500, 6610, 6710, 6810, 7410, 7610, 7710, 9030, Compatible with Ford Construction and industrial models 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 655, 655A, 655C, 655D, 675D, 750, 755, 755A, 755B, 7500, Compatible with Ford Engine(s) BSD442, BSD444, BSD444T, 256, Compatible with New Holland tractor models TB80, TB85, Compatible with New Holland Hay Cutting(s) 1118, 1499, Compatible with Versatile tractor models 276 (V and VII), Compatible with Versatile Hay Cutting(s) 4750 (V), Replaces OEM nos 87800421, 83963691, E7NN6582DA, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434439) $60.01

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Valve Spring - Used on for 158, 175, 192, 201, 256, 268 and 401 CID gas and diesel engines. One used per valve. It replaces C7NN6513A, D6NN6513A, 81817098, 83911693. (Item #: 166305, Ref: D6NN6513A) $3.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Engine Parts

[Categories] [All 6500 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy